3-73
CHAPTER 3 Settings and Measurement
Move the cursor to the le or folder you want to delete and then press the [ENTER] key. The " " mark is
displayed in the checkbox. (Multiple les/folders can be selected)
Press the [ENTER] key again to cancel it.
When it is cancelled, the " " mark will disappear.
The selection is completed by pressing the [QUIT] key.
(2) Enable the deletion.
The message of “Delete the le. All the data will be lost. Are you sure?” is displayed.
Operate the [ENTER] key again to delete the selected data.
(7)-2 Data Save
During replaying the data, the displayed data can be saved in the internal memory (SD1) or SD memory card
(SD2) by selecting the Data Save in the File Menu.
<If the naming method is Auto> <If the naming method is Arbitrary>
(1)
(3)
(1)
(2)
(3)
(5)
(4)
(2)
(4)
Setting Description
(1) File Type Sets the le format used to save data.
GBD: Creating a data le in Graphtec's proprietary binary format.
* Data tampering can be prevented.
CSV: Creating a data le in text format.
(2) Naming method Sets how a data le should be named.
Auto : Automatically supplies the le name.
Example : 20150201-123456.GBD
Number part : File creation date
* The le is created on February 2, 2015, 12:34:56 in this example.
GBD : Data format
GBD (Binary data)
CSV (Text format)
Arbitrary : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
(3) Folder Specify a folder to which you want to capture (or save) data. For details, refer to "(8) File
box".
(4) Save range Set the data range to be saved.
All data : All of the data is saved regardless of the cursor operation.
Data between cursors : Only the data in the range between cursors A and B is saved.
(5) File Specify a folder to which you want to capture (or save) data. For details, refer to "(8) File
box".
To Next Page
Loading...
