GRAPHTEC midi LOGGER GL240 - 3.3 Understanding Operation Modes

3-16
CHAPTER 3 Settings and Measurement
3.3 Operation Modes
You can check the system operation status in the status message display.
< Free Running >
<Replaying while capturing data>
< Capturing >
< Replaying >
Operation Description Simple message display
Free Running Startup status, or data is not being captured. Free Running
Capturing The data is being captured. Recording SD1 or Recording SD2
Replaying while capturing
data
Replaying the data during capture and displaying the
current waveform
Recording SD1 or Recording SD2
Replaying Captured data is being replayed SD1 Memory Review or SD2 Memory Review
Operation status transition
* Only when there is the integrated CH.
[START/STOP] key
Free Running
ReplayingCapturing
2-screen replaying display
[QUIT] key
[START/STOP] key [REVIEW] key
[REVIEW] key
[DISPL AY] key
Replay while capturing
[DISPL AY] key
[DISPL AY] key
[QUIT] key or [REVIEW] key
Integrated bar graph display