GRAPHTEC midi LOGGER GL240 - Data Replay Menu

3-80
CHAPTER 3 Settings and Measurement
(10) Data replay menu
Select the data you want to replay from the “Data replay source” by pressing the [REVIEW] key and replay
the captured data.
<Select replay data source>
Select items Description
File Specify the le in the capture destination (save destination).
Checksum verication Veifying checksum
The checksum conrmation result is displayed in the dialog.
When checksums match: "Checksum matched"
In case of checksum mismatch: "Checksum mismatched"
For CSV-formatted data, only the data captured by this GL240 can be replayed.
 "Checksumverication"isdisplayedonlywhenselectingaGBDletowhichachecksumisattached.For
detailsonhowtoaddachecksum,referto"3.4Settingmenudescription"-"(6)-9Addchecksumtole".
<WhenusingthereplaydataandcursorB><WhenusingthereplaydataandcursorA>
CursorA CursorB
Data replay menus are displayed by pressing the [MENU] key during replay.
Setting Selections available
Cursor
Position
Move to First Data
Press right key to execute.
Move to Last Data
Press right key to execute.
Move to Center
Press right key to execute.
Move to
Selected Position
Method: Position, Time
[Position] Position 0 to end of data
For example, if the sampling interval is 100 ms, capture
destination is the built-in RAM, and the number of capture
points is 10000, settings up to 999.9ms are available.
[Time] Date Date from the start to end of the data
Time Time from the start to end of the data
Cursor Synch Off, On