GRAPHTEC midi LOGGER GL240 - 4.1 Standard Specifications Overview

4-2
CHAPTER 4 Specication
4.1 StandardSpecications
StandardSpecications
Item Description
Number of analog inputs 10 channels
External input and output functions Trigger input or External sample pulse (1ch),
Logic input (4ch) or Pulse input (4ch), Alarm output (4ch)
Data backup functions Setup parameters: EEPROM/Clock: Lithium battery
Clock accuracy
(23°C environment)
±0.002% (accurate within about 50 seconds per month)
Operating environment 0 to 45°C, 5 to 85% RH
(0 to 40°C when operated in batteries/15 to 35°C when battery is charging)
Withstand voltage Between each input ch and GND terminal: 350Vp-p 1 minute
Between each input terminals: 350Vp-p 1 minute
Power supply • AC adapter : 100 to 240 VAC, 50 to 60 Hz
• DC input : 8.5 to 24 VDC (26.4 V max.)
• Battery pack (option) : 7.2 VDC (2900 mAh)
Power consumption AC power consumption
(when using the AC adapter provided as a standard accessory)
No. Condition
Power
supply
Normal
During
recharging
battery
1 When the LCD is on AC100V 16VA 36VA
AC240V 24VA 52VA
2 When the screen saver is operating AC100V 15VA 35VA
AC240V 22VA 51VA
DC current consumption
No.
DC
voltage
Condition Normal
During
recharging
battery
1 +24V When the LCD is on 0.24A 0.61A
2 When the screen saver is operating 0.22A 0.59A
3 +12V When the LCD is on 0.42A Recharging
not possible
4 When the screen saver is operating 0.37A Recharging
not possible
5 +8.5V When the LCD is on 0.58A Recharging
not possible
6 When the screen saver is operating 0.53A Recharging
not possible
* Set the LCD brightness to "Bright" as a normal condition.
External dimensions
(approximate) [WxDxH ] *
1
188×117×42mm (not including protruding parts)
Weight (approximate) *
2
500g
Vibration- tested conditions Equivalent to Equivalent to Automobile parts Type 1 Class A
*1 Without attaching rubber protection cover.
*2 AC adapter and battery are not included, but one terminal unit is included.