3-87
CHAPTER 3 Settings and Measurement
(12) Quick setting
<Free Running> <Replay data>
(11) -1
(11) -2
(11) -3
Screen Operation mode Sign Description
Waveform Free Running SAMPLE Using the
key, change the sampling interval.
ZONE Using the
key, change the zone division.
Capturing ZONE Using the
key, change the zone division.
Replaying during
capture
ZONE Using the
key, change the zone division.
Replaying SEARCH Using the
key, perform the search.
: Search the past waveform.
: Search the future waveform.
ZONE Using the
key, change the zone division..
(12)-1 SAMPLE
Set the sampling interval of the measurement data before free Running or capturing.
For the sampling interval, refert o “(2)1 Smapling interval” described above.
(12)-2 ZONE
The waveform display can be switched to 1, 2, 5 or 10-divided display.
1-divided: 10ch full scale display
2-divided: The display is divided into two screens. 1, 3, 5, 7, 9-ch and 2, 4, 6, 8, 10-ch are displayed in
the 2-divided screens separately.
5-divided: The display is divided into ve screens. 1/6ch, 2/7ch, 3/8ch, 4/9ch, 5/10ch are displayed in the
5-divided screens separately.
10-divided: The display is divided into ten screens. 1-10ch is displayed in a single screen separately.
(12)-3 SEARCH
Search the alarm generated position in the replayed data.
To Next Page
Loading...
