3-15
CHAPTER 3 Settings and Measurement
Basic Procedures Used in Settings
The following are basic operation procedures for settings.
1. Press the [MENU] key to open each menu.
2. Use the
key to move the cursor to the items you want to set.
3. Press the [ENTER] key to display a list of setting values.
4. Use the
key to select a setting value.
5. Press the [ENTER] key to conrm the value.
The above explanation shows the basic procedure that may be used for each setting.
The setting procedure varies depending on each setting item. Please set in accordance with the
instructions displayed in the menu.
To Next Page
Loading...
