GRAPHTEC midi LOGGER GL240 - Page 117

3-75
CHAPTER 3 Settings and Measurement
(7)-4 Specify Save Destination (Screen Copy)
Saves the data that is replaying on the screen in the internal memory (SD1) or SD memory card (SD2) as an
image le.
<If the naming method is Auto> <If the naming method is Arbitrary>
(1)
(2)
(3)
(1)
(2)
(3)
(4)
Setting Description
(1) File Type Sets the le format used to save data.
BMP : Saves data in bitmap le format
PNG : Saves data in ping format
(2) Name Type Set how a data le should be named.
Auto : Automatically supplies the le name.
Example : 20150201-123456.BMP
Number part : File creation date
* The le is created on February 1,2015,12:34:56 in this example.
BMP : Data format
BMP : Bitmap le format
PNG : Ping format
Arbitrary : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
(3) Folder Specify a folder to which you want to save data. For details, refer to "(8) File box".
(4) File Specify a le to which you want to save data. For details, refer to "(8) File box".
(7)-5 Execute (Screen Copy)
Executes screen copy and saves it to an image le.
* Refer to page (7)-4 "Specify Save Destination" for details on specifying the save destination.
(7)-6 Save
Saves the setting conditions of the GL240.
<If the naming method is Auto> <If the naming method is Arbitrary>
(1)
(2)
(1)
(2)
(3)
Setting Description
(1) Name Type Set how a data le should be named.
Auto : Automatically supplies the le name.
Example : 20150201-123456.CND
Number part : File creation date
* The le is created on February 1,2015,12:34:56 in this example.
CND : Data format (GL240 setting le format)
Arbitrary : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
(2) Folder Specify a folder to which you want to save data. For details, refer to "(8) File box".
(3) File Specify a le to which you want to save data. For details, refer to "(8) File box".