3-3
CHAPTER 3 Settings and Measurement
2. Time/DIV display area
Displays the current time scale.
3. Status mark
: Appears when neither capture nor replay is in progress.
* : Displayed when saving the captured data in the internal memory (SD1) or SD memory card
(SD2).
* : Appears when waiting for a trigger during capturing and the stop key after capturing.
* : Displayed when replaying the captured data in the internal memory (SD1) or SD memory
card (SD2).
Please do not turn off the power when the “ * “ status icon is displayed or the device is being accessed.
The data that has been captured or is being captured is may be damaged.
Please start the operation after making sure that the status mark is switched to "STOP".
4. Wireless sensor display
Displayed in the case of wireless connection.
: When the connection of wireless sensor is recognized, the display color is changed to
orange.
5. Device access display (Internal memory)
: Not accessed to the internal memory (SD1).
* : Accessed to the internal memory (SD1).
During accessing to the internal memory (SD1), the POWER LED blinks.
Please do not turn off the power when the “ * “ status icon is displayed or the device is being accessed.
The data that has been captured or is being captured is may be damaged.
Please start the operation after making sure that it is not being accessed on the display.
To Next Page
Loading...
