3-6
CHAPTER 3 Settings and Measurement
14. Pen display
Displays the each channel signal position, trigger position, and alarm range.
Trigger position Alarm range
Stop position
Start position
Rising Falling Win In Win Out
15. Time stamp
Displays the time stamp of a currently displayed waveform as time.
This indicator shows that the
measurement data was captured at
16:35:44.
16. File name display area
(1) During data capture
A capture le name is displayed during capture.
* If the ring recording setting is ON, a le name displayed during capture ends with "_RINGx" (x
represents a number) but the actual le name does not include "_RINGx".
In the above gure, if the ring recording is set to ON, the le name during capture will be displayed,
for example, as "<SD1>150520\150520-133932_RING4.GBD" but the actually created le will be
"<SD1>150520\150520-133932.GBD".
* Refer to “(2) DATA settings” in “3.4 Setting Menus” for details.
(2) During data replay
Information on the time axis of the cursor is displayed during replay.
Time to which the cursor points
Selected cursor
Time difference between Cursors A and B
17. Scale lower limit
Displays the scale lower limit of the currently active channel.
To Next Page
Loading...
