GRAPHTEC midi LOGGER GL240 - Page 63

3-21
CHAPTER 3 Settings and Measurement
Setting Selections available
Logic/Pulse Off, Logic, Pulse
[Logic] Filter Off, On
Misc. Waveform
color setting
0 to 31 for each of red, green, blue (RGB)
Trace
setting
Off, On
[Pulse] Input Off, Revolution counts, Counts, Inst.
Filter Off, On
Slope H, L
EU Function Off, On
Meas. Value Set numeric value
EU output
value
Set numeric value
Select Cur, Length, Area, Volume, Velocity, Accel, Freq, Mass, Energy,
Pressure, Flow , Temp, Strain, Brightness,Concentration
Unit (The selections vary depending on the unit selected in the above.)
Arbitrary
unit
Enter text
Misc. Waveform
color setting
0 to 31 for each of red, green, blue (RGB)
Line
Thickness
Setting
1 to 8 dots
Trace
setting
Off, On
Number of
pulses per
revolution
1 to 10000