GRAPHTEC midi LOGGER GL240 - Page 72

3-30
CHAPTER 3 Settings and Measurement
Wireless sensor (GL100-WL: optional) setting
The GL240 can receive the optional wireless type (GL100-WL) and the data by installing the optional
wireless LAN unit (B-568).
For the wireless LAN setting method, refer to “(5) LAN setting” in “3.4 Setting Menus”.
For the GS sensor and terminal/addapter connecting to the GL100-WL, refer to the GL100 User’s Manual.
For the operations after connecting the wireless unit, refer to “
*****
setting” described above.
* The
*****
symbols indicate the abbreviation of name (model).
The following gure is the AMP setting screen when the GL100-WL+GS-LXUV are connected.
After connecting the wireless sensor, use the [MENU] key to change the CH1-CH10 displayed on the AMP
setting screen to the WL1-WL8, or use the [FILE/GROUP] key to change the channel group to the WL1-WL8,
and then use the [MENU] key to display the “Wireless sensor setting” screen.
AMP Setting screen
CH display part
• WL Display: Displayed when the wireless sensor is connected.
• GS Display: Displayed when the GS sensor and termional/addapter are connected.
Wireless LAN connection display
Wireless sensor connection display
AMP Setting screen
Channel group switching
When the wireless sensor is not enabled, the wireless sensor setting cannot be performed.
Make sure that the connected wireless sensor is in the wireless LAN status.
<Description of wireless sensor display>
(2) Measurement module 1
(1) Wireless sensor display
The WL and CH are displayed.
The information of GS sensor and terminal/addapter connected to
the GL100-WL is displayed.
(3) Measurement module 2
The information when two types of GS sensor and terminal/
addapter are connected with GL100-WL+GS-DPA (Branch adapter
for GS) is displayed.
The information of the Setting screen varies depending on the type of GS sensor and terminal/addapter to
be connected.
When the data is captured in the GL100-WL, a few of the data may be delayed by reason of the data
processing of the GL100-WL and the connected GL sensor and terminal/adapter.
Please consider the data lag when the data is tried to conrm and replay.
For details on the wireless connection between the GL240 and GL100-WL, refer to “(5) LAN setting” in “3.4
Setting Menus” and the example of operating procedures.