GRAPHTEC midi LOGGER GL240 - Page 86

3-44
CHAPTER 3 Settings and Measurement
(2)-2 Captured data le name
This is used to select the name of a le or folder to which you want to save capture data.
<If the naming method is Arbitrary>
(1)
(2)
(3)
(4)
(5)
<If the naming method is Auto>
(1)
(2)
(3)
(5)
Setting Description
(1) File Type Sets the le format used to save data.
GBD : Creating a data le in Graphtec's proprietary binary format
* It is not possible to change the data.
CSV : Creating a data le in text format
(2) Name Type Sets how a data le should be named.
Auto : Automatically supplies the le name.
Example: 20050101-123456_UG.GBD
Number part : File creation date
* The le is created on January 1, 2005, 12:34:56 in this example.
Arbitrary : Data is captured to a le with an entered le name.
Sequential number : A le is created with an arbitrary le name that has been entered,
followed by a sequential number.
Example: If the le name is "TEST"
First le : TEST_SER1.GBD
Second le : TEST_SER2.GBD
Third le : TEST_SER3.GBD
* If the same le name already exists, _CP* is added to the end of a le name to prevent
overwriting. The asterisk (*) represents a number.
Example: TEST_CP1.GBD
(3) Folder Species the le in the capture destination (or save destination. For details, refer to “(8) File
box”.
(4) File Species the le in the capture destination (or save destination. For details, refer to “(8) File
box”..
(5) Ring/Relay capture Perform the Ring/Relay capture setting. For details, refer to “(2)-3 Ring/Relay capture
setting”.
The le should be saved in the folder you created. When the data les are continued to be saved in the root
folder, the data le may be not saved regardless of the memory remaining capacity due to the limitations
of the le system.
Changing the sampling interval, capture destination, number of measuring channels (number of channels
for which the input is not Off), etc. will change the Capture Space and Capture Time on the screen.
If nd that the measurement time exceeds the Capture Time, take one of the following measures:
•
Change the sampling interval.
•
Delete unnecessary les.
•
In the case of SD CARD2, change to the SD memory card with more free space.
Capture Space : Displays the amount of memory space available for data capture.
Capture Time : Displays time available for at the SD memory card.
* The Capture Time is calculated for 2 GB at the maximum.
The Capture Time more than 366 days is displayed as 366 day over.