GRAUPNER mx-16 ifs User Manual

45
Program description: model memories
Copy model ¼ model
Hold the rotary cylinder pressed in, select the “Copy
model ¼ model” sub-menu, and press ENTER or the
rotar
y cylinder:
select model
clear model
copy mod–>mod
=>
=>
=>
Select the model to be copied using the rotary cylinder …
03
04
ULTIMATE
02
STARLET
BELL47G
copy from model :
01
GRAUBELE
... then press ENTER or the rotary cylinder again. In the
“Copy to model” window you can now select the target
memory and confi rm your choice with ENTER or the ro-
tary cylinder. Alternatively you can interrupt the process
with ESC. It is possible to overwrite a model memory
which already contains model data.
03
04
ULTIMATE
02
copy to model :
STARLET
BELL47G
05
¿¿
empty
¿
When you confi rm the selected model memory by press-
ing the ENTER button or the rotary cylinder, the security
query appears:
Caution:
The erasure process is irrevocable. All model memo-
ry data is reset to the factory default settings.
Note:
If you wish to erase the currently active model memory
in the basic display, you will be required to defi ne the
model type “Helicopter” or “Fixed-wing” immediately.
However, if you erase a non-active model memory, then
the message “
ÃÃemptyÔ appears in the Model select
menu.
model
02 ULTIMATE
05
to be copied ?
NO
YES
¿¿
empty
¿
Selecting NO interrupts the process, and returns you
to the previous page. If you select YES with the rotary
cylinder, and confi rm your choice with ENTER or the
rotary cylinder, then the selected model is copied into
the chosen target model memory.

GRAUPNER mx-16 ifs Specifications

General

Brand	GRAUPNER
Model	mx-16 ifs
Category	Remote Control
Language	English