Touch the value in “MODE” line to select “UP” or “DOWN”. Timer may be counted down
or counted up with your choice. Count-up timer is to count from zero to the setup time and
Count-down timer is to count from the setup time to zero.
After “MODE” setup, you need to set “ALARM”. The alarm sounds from the last 20 seconds
in the setup time. The rst 10 seconds, it sounds at intervals of 2 seconds and the next 10
seconds, it sounds at interval of 1 second.
After “ALARM” setup, you may set “START SW”. Touch “NULL” icon in “START SW” to call “Select”
message popup. Now, move the switch with your choice then this switch is set on/ off switch for
“START SW” and the switch direction setup page appears. You may change ON/OFF by touching
icons. When the switch is moved to the direction of on, the function is operated. Touch “Back” icon
to return TIMER setup page
Touch
Touch
Touch
TouchTouch
Touch
21
To Next Page
Loading...
Need help?
General
