To Next Page

To Previous Page

11. SERVO

It is used to test a servo and check the servo movement in a graph. You are able to test

the servo movement from 0.5sec to 5 sec with your choice. Touch “Servo” icon in the base

page to call the servo setup page. In the servo setup page, the servo movement of every 12

channels is displayed in graph and gure when transmitter is operated. Touch “View” icon in

the right bottom to call “Test” function page. Touch “Off” icon in the right bottom then “Off” is

changed to “On” and then “Test” function is activated. During the operation of “Test” function,

touch “0.5s” icon to activate in blue. With INC and DEC buttons, you may select from 0.5sce

to 5sec of operation speed. Touch “ON” icon to change to “OFF” then “Test” function is termi-

nated. When “TEST” icon is touched, you may return VIEW function page.

Touch

GRAUPNER mz-18 HoTT User Manual

Other manuals for GRAUPNER mz-18 HoTT