IS200 TX machine . 32
First contact
Changing the fuses
You will find spare fuses in the machine tool box.
The IS200 TX machine is supplied with 1 pair of fuses 2 A T.
(T necessary for your safety)
Unplug your machine cable from the mains.
Disconnect the mains cable from the socket at the back of the machine to give easier access.
1. Use the tag to pull out the drawer containing the fuses (pict. 48).
o
2. When the drawer is out, swivel it to the right (pict. 49).
3. Replace the fuse(s) and close the drawer again (pict. 50).
If the new fuse blows without apparent reason, contact an approved GRAVOGRAPH
technician.
To Next Page
