Great Computer JII-61 - The Specification for GCC Blade

Jaguar II User Manual
The Specification for GCC Blade
VI
For cutting general signage vinyl. Blade with largest angle.
BK07026A
BK07026ABK07026A
BK07026A
GCB
GCBGCB
GCB-
--
-145S
145S145S
145S
The blade is 45°with Yellow Cap
Yellow Cap Yellow Cap
Yellow Cap, 0.25 mm blade offset and 5 miles life.
For cutting thick fluorescent and reflective vinyl. Also for cutting
detailed work in standard vinyl.
BK07027A
BK07027ABK07027A
BK07027A
GCB
GCBGCB
GCB-
--
-245R
245R245R
245R
The blade is 45° with Red Cap
Red Cap Red Cap
Red Cap, 0.25 mm offset and 5 miles life.
For cutting reflective vinyl, cardboard, sandblast, and stencil shar
p
edge.
BK07028A
BK07028ABK07028A
BK07028A
GCB
GCBGCB
GCB-
--
-360SB
360SB360SB
360SB
The blade is 60° with Green Cap
Green CapGreen Cap
Green Cap, 0.50 mm blade offset and 5 miles life.
For cutting thin sandblast mask and stencil with friction feed or
sprocket feed machine.
BK07029A
BK07029ABK07029A
BK07029A
GCB
GCBGCB
GCB-
--
-460SO
460SO460SO
460SO
The blade is 60° with Blue Cap
Blue Cap Blue Cap
Blue Cap, 0.25 mm blade offset and 5 miles life.
For Cutting small text and fine detail. Sharp blade with smallest
offset.
BK07030A
BK07030ABK07030A
BK07030A
GCB
GCBGCB
GCB-
--
-500
500500
500
The blade is 0.175 mm blade offset with Black Cap
Black Cap Black Cap
Black Cap and 5 miles life.
The Specification for GCC Blade