number and icon settings.
Click
“
Adding
”
button to add device or delete device in this room.
Note: When Adding devices , it only allows to add air condition units and
fresh air units which are connected with air box.
6.2.5 Air State Curve
Fig.6.5 Page of Air State Cure
Click curve view button to enter air state curve interface. This interface will display
the air state curve within 24 hours.
Note: Curve data sample will be taken every one hour. If the data sample in a
certain moment is 0, the point corresponding to this moment is cut off and this point
is discontiguous. This function is available only when the room adds the fresh air
unit which is connected with air box.
The PM2.5 range is:0-1000ug/m
3
;The CO
2
range is:0-2000ppm ; The Temperature
range is:0--40
℃
; The Humidity range is: 20%-90%. if the parameter exceeds the
mileage, it wills display the maximum and minimum values.
To Next Page
Loading...
