DC INVERTER MULTI VRF INSTALLATION
127
2. AS shown in Fig.4, install the panel body, and then tighten the screws according to the
sequences in the figures.
3 .As shown in Fig.5, install the panel on the panel ,and then turn it for fastening
4.6 cassette type indoor unit
Schematic diagram of installation spaces
Fig.1
● Select install location of the indoor unit
1. Obstruct should put away from the intake or outlet vent of the indoor unit so that the airflow can be
blown though all the room.
2. Make sure that the installation had accord with the requirement of the schematic diagram of installation
spaces.
3. Select the place where can stand 4 times of the weight of the indoor unit and would not increase the
operating noise and oscillate.
4. The horizontally of the installation place should be guaranteed.
5. Select the place where easy drain condensated coagulated water, and easy connect with outdoor unit.
To Next Page
Loading...
Need help?
General
