DC INVERTER MULTI VRF CONTROL
61
How to insert batteries
Two batteries (Two AAA dry-cell batteries) are used by the remote control
1. Remote the cover from the back of the remote control downward, take out the worn batteries and insert
two new ones (Make sure the two poles are correct)
2. Re-attach the cover.
1.All the prints and code no. will
be showed on the displayer after
the insert of batteries. The remote
control can be operated after 10sec.
2.The lifetime of the batteries is
about one year
.
3.Don't confuse the new and worn
or different types of batteries.
4.Remove batteries when the
remote control is not in use for a
longtime to avoid mal-function
caused by liquid leakage.
5.The remote control should be
placed about 1m or more from the
TV set or any other electric
appliances.
6.The remote control should be
used in the receivable range (the
reception range is 10m)
7.When the remote control can not
be controlled in the situation of
inserted batteries, please remove
the back cover and press "ACL"
button to make it normal.
②Insert 2AAA dry-cell
battaries(attachment)
ACL
①Remove the cover
③Re-attach the cover
open
RESET KEY
To Next Page
Loading...
