Multi VRF Indoor
Unit Service Manual
97
7. Remove motor
cover subassembly
8. Loosen screws.
a screwdriver, and then draw the water pipe
out from the water pump.
9. Replace the
water pump
a new one.
10. Reconnect
the water pipe of
the water pump
pump and then tighten screws around it.
11. Reinstall the drain
pan and the bracket
tighten screws around them with a screwdriver.
12. Reinstall the front
panel assembly.
place and tighten screws around it with
a screwdriver.
13.Reinstall the
front panel.
press the locks at both ends to secure it.
To Next Page
Loading...
Need help?
General
