unadjustable
2. When "Floor config" is set to
"Without", this function is adjustable.
When the water tank is unavailable,
this function will be reserved, and
the LCD will display ‘Reserved’.
When the water tank is unavailable,
this function will be reserved, and
the LCD will display ‘Reserved’.
When the water tank is unavailable,
this function will be reserved, and
the LCD will display ‘Reserved’.
When the water tank is unavailable,
this setting will be reserved. If it is
set to “On”, the solar kit will function
no matter if the timer is activated or
not; if it is set to “Off”, the solar
heating function is unavailable; if it is
set to “Timer”, the solar kit can
function when the timer has been
activated.
Air/Without/
Air+hot water
This setting cannot be changed from
“Air” to “Air+hot water” directly but
via “Without” this option and the unit
will go to Without status. Meanwhile,
the control will send out “Without”
command for consecutive 40
seconds (it is longer than the
communication error, and the “On”
command can be performed only
when 40 seconds have been