Gree GRS-CQ8.0Pd/NaEK - Page 77

Unit Control
72
Compressor running state
Compressor
On/Off
Fan 1 running state
Fan 1
On/Off
Fan 2 running state
Fan 2
On/Off
Heat pump-water pump
HP-pump
On/Off
Solar water pump running state
SL-pump
On/Off
Reserved
Reserved
Reserved
Tank heater running state
Tank heater
On/Off
Reserved
Reserved
Reserved
3-Way valve 2 running state
3-way valve 2
On/Off
Crankcase heater running state
Crankc.heater
On/Off
Chassis heater running state
Chassis heater
On/Off
Plate heat exchanger heater
Plate heater
On/Off
Defrost
Defrost
On/Off
Oil return
Oil return
On/Off
Thermostat
Thermostat
Off/Cool/Heat
Assistant heater running state
Assist. Heater
On/Off
Circulating two-way valve 1 running state
2-way valve 1
On/Off
Reserved
Reserved
Reserved
Doorguard
Doorguard
Card in/Card out
Opration LED
Opration LED
On/Off
Error LED
Error LED
On/Off
4-way valve running state
4-way valve
On/Off
Enthalpy-enhancing solenoid valve
En.valve
On/Off
Heat pump-auxiliary heater 1
HP-heater 1
On/Off
Heat pump-auxiliary heater 2
HP-heater 2
On/Off
Solar kit- freeze protection
SL-Antifree
Enabled/Disabled
Heat pump-freeze protection
HP-Antifree
Enabled/Disabled
3. 2.4.2 Parameter View (Para View)
At the parameter view pages, the unit is enabled to view the units’ running parameters, like outdoor
temperature, suction temperature, discharge temperature, water in temperature, water out temperature
etc.
[Operation Instructions]
1. At the
VIEW
page, select
Parameter
and then press the OK key to go to the
Para View
page.
2. At the
Para View
page, it is able to view each parameter.