Plate heat exchanger Water in temperature
Plate heat exchanger water-out temperature
Refrigerant liquid line temperature
Refrigerant gas line temperature
E-heater water-out temperature
Water tank temperature set point
Water tank temperature reading
Solor kit-entering water temp
Solor kit-leaving water temp
Target temperature for Weather-dependent Mode
Target temperature for floor debug
Time period for floor debug
3. 2.4.3 Error View
At the error view pages, the user is enabled to see which error the unit suffers.
[Operation Instructions]
1. At the
VIEW
page, select
Error
and then press the OK key to go to the
ERROR
page.
2. At the
Error View
page, it is able to view each error.