Gree XK60

Wired Controler XK60
15
time to stop the unit won’t be displayed.
Timer “Off” Setting:
Set to the time desired to stop the unit. When the unit is On, press the
Timer button, with xx. Hour displayed and OFF blinking, then press
▲/▼to adjust the timer time, then press the Timer button again to
confirm. If the Mode button is pressed prior to confirmation, it
will switch to the Timer On setting. After the timer On setting, the
LCD displays xx. Hour ON OFF,xx. Hour indicating the time to stop the
unit, while the time to start the unit won’t be displayed.
Cancellation of Timer Setting: The timer setting can be canceled
by pressing “Timer”. Then , xx. Hour won’t be displayed.
Timer Setting under the ON state of the Unit is as shown in Fig.11: