Gree XK60

Wired Controler XK60
29
3.11 I-Demand Setting
Under cooling mode, press “Function” button to select I-Demand
function with “I-Demand” icon flashing. Press “Enter/Cancel” button to
activate I-Demand function. It will display the icon of I-Demand, and “5E”
will be displayed on the temperature display area.
When I-Demand is on, press “Function” button to set function, with
“I-Demand” icon flashing. Then press the “Enter/Cancel” button to cancel
I-Demand function.
How to set I-Demand function is shown in the Fig.17: