Gree XK60

Wired Controler XK60
38
3.14 SAVE Function Setting
Energy Saving Function: Energy saving can make the air conditioner
runs in a smaller temperature range by setting lower limited value of
setting temperature in the COOL or DRY mode and upper limited value in
the HEAT mode. As for the different batches of wired controllers, there
are two kinds of setting method for SAVE function.
(1) Method 1 for setting SAVE function:
Energy Saving Setting for Cooling
When the unit runs under the COOL or DRY mode, press the
Function button to select the “SAVE” function option, with “SAVE”
flashing, and then press ▲ or ▼ to adjust the lower limit, after that, press
the Enter/Cancel button to activate this function.
Energy Saving Setting for Heating
When the unit runs under the HEAT mode, press the Function
button to select the “SAVE” function option, with “SAVING” flashing, then
press the Mode button to switch to the “SAVE” setting for the HEAT
mode and then press ▲ or ▼ to adjust the upper limit, after that, press
the Enter/Cancel button to activate this function.