Gree XK60

Wired Controler XK60
45
cooling mode is 61℃;the initial value of the maximum value for the set
temperature under heating mode is 30
℃
.
⑤
After setting SE function, if the set temperature under all modes exceeds
the SE setting range, it will select the corresponding limit value as the set
temperature.
⑥
If press “▲”button when the set temperature is upper temperature limit,or
press “▼”button when the set temperature is lower temperature limit,or the
set temperature of the remote device is out of the limit, the characters or
the icon of “SE” blinks for three times and the buzzer will give out a sound
of twice.
3.15 E-HEATER Setting
E-HEATER: in the HEAT mode, “E-HEATER” function is allowed to
be activated to improve the heating efficiency. Generally, it will be
activated automatically as the unit goes into the HEAT mode through any
button operations .
Activation of the “E-HEATER” Function: firstly press the Function
button to select the “E-HEATER” option, with the symbol “E-HEATER”
flashing, and then press the Enter/Cancel button to activate it. After the
activation, the symbol “E-HEATER” will always be displayed.