Wired Controler XK60
14
Fig.10 Up and Down Swing Setting
3.7 Timer Setting
Timer “On” Setting:
Set to start the unit. when desired. When the unit is OFF, press the
Timer button, with xx. Hour displayed and ON blinking, then press ▲/
▼to adjust the timer, then press the Timer button again to confirm. If the
Mode button is pressed prior to confirmation, it will switch to the
Timer Off setting. When in the timer Off setting, the LCD displays xx.
Hour ON OFF, xx. Hour indicating the time to start the unit, while the
To Next Page
Loading...
