Wired Controler XK60
52
3.17 Filter Setting
Under On status, press “Function” button to set “Filter” function with
“Filter” icon flashing. The setting pollution level will be shown at the Timer
area. Press “▲” and “▼” to adjust pollution level and press
“Enter/Cancel” button to activate Filter function.
When the Filter function is set, press “Function” button to set with
“Filter” icon flashing. Press “▲” and “▼” to adjust till “00” is shown on the
timer area. Then press “Enter/Cancel” button to cancel the Filter function.
How to set Filter function is shown in the Fig.24:
To Next Page
Loading...
