Wired Controler XK60
55
While setting Filter, two numbers will be shown on the timer area.
The first number represents the pollution level. The second number
shows the accumulated operating time of the indoor fan. There are four
statuses in total:
(1) No Filter function setting ( “00” shown at the timer area)
(2) When the filter reaches light-level pollution, “1” will be shown at
the first place, When “0” shows up at the second place, the
accumulated operating hour reaches 5500h. Every increase of
the number means another 500h is accumulated. When “9”
shows up, it means the operating hour reaches 10000h.
(3) When the filter reaches middle-level pollution, “2” will be shown
at the first place, When “0” shows up at the second place, the
accumulated operating hour reaches 1400h. Every increase of
the number means another 400h is accumulated. When “9”
shows up, it means the operating hour reaches 5000h.
(4) When the filter reaches serious-level pollution, “3” will be shown
at the first place, When “0” shows up at the second place, the
accumulated operating hour reaches 100h. Every increase of
To Next Page
Loading...
