Greenlee 910FS - Electrode Stabilization and Splice Settings; Section 3. Splice Set; Splice Setting Configuration

910FS Splicer
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
30
Stabilize Electrodes
Perform this function when the splicer is not performing properly and/or when the arc
display is not a uniform light pattern.
1. Prepare and load left and right bers.
2. Press
8
and wait for the splicer to automatically stabilize the electrodes.
Splice Set
Splice setting options include splicing control, display settings, and splice limit settings
for all splice proles.
Navigate to the “Splice Set” icon and press
8
.
Each menu item can be enabled or disabled per the user’s preference.