19
4.2.2 Process nos. 2—5 (Cleaning and Rinsing)
Process nos. 2—5 can be used either as a cleaning or rinsing bath. The following screen menu shows
the individual process parameters that can be changed. The setting can be changed by tapping the
field highlighted in grey.
Process nos. 2—5 can be activated or deactivated using ON/OFF.
Important! New settings must be confirmed with SAVE. This automatically takes the user back to the
main menu.
At the top in the middle is the HOME button which is used to return to the main menu
The following is a detailed explanation of the individual setting options for Process nos. 2—5:
TIME/POSITION Process duration in minutes and seconds
ROTATION/OSCILLATION Rotation of the basket or back and forth movement (oscillation)
VERTICAL MOVEMENT Vertical movement during the cleaning process ON or OFF
SPINNING TIME Switch-on time of the SPIN drive in minutes and seconds
SPINNING SPEED Speed of SPIN drive in revolutions per minute
4.2.3 Process no. 6 (Drying)
Process no. 6 is a drying process. The following screen menu shows the individual process parameters
that can be changed. The setting can be changed by tapping the field highlighted in grey.
Process no. 6 can be activated or deactivated using ON/OFF.
To Next Page
Loading...