5
1 General instructions
1.1 Information about this operating manual
This is the original operating manual for the product ACS 921 by Greiner Vibrograf AG.
The version and language are shown on the title page.
1.2 Information on customer service
If you have any questions about the product or would like to request a service relating to the product,
please do not hesitate to contact our Customer Service.
Contact:
Greiner Vibrograf AG
Mittelstrasse 2
CH-4900 Langenthal
+41 62 916 60 80
info@greinervibrograf.ch
www.greinervibrograf.ch
1.3 Intended use
The ACS 921 is a cleaning device that cleans watch parts with the addition of cleaning fluid. Other uses
are not permitted. The installation and operating conditions specified in this operating manual must be
adhered to.
1.4 Improper use
Only the cleaning fluids listed in Section 4.5 may be used.
Greiner Vibrograf AG accepts no liability whatsoever for the use of other products.
To Next Page
Loading...