-52-
Model G0771 (Mfd. Since 8/15)
A crosscut sled (see Figure 99) is a fantastic
way to improve the safety and accuracy of cross-
cutting on the table saw. Most expert table saw
operators use a crosscut sled when they have
to crosscut a large volume of work, because the
sled offers substantial protection against kickback
when crosscutting.
Figure 99. Example of crosscut sled.
Crosscut
Sled
Crosscut Sled
One of the best accessories for improving the
safety and ease of using a table saw is simply plac-
ing a large table (outfeed table) behind the saw to
catch the workpiece (see Figure 98). Additionally,
another table to the left of the saw (support table)
can also help support large workpieces so they
can be cut safely and accurately.
Figure 98. Example of outfeed & support tables.
Outfeed
Table
Support
Table
Outfeed & Support
Tables
To Next Page
Loading...
Need help?
General
