Model G0886 (Mfd. Since 01/19)
-13-
SECTION 3: SETUP
Needed for Setup
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
The following are needed to complete the setup
process:
• For Lifting and Moving:
— Two additional people
— A forklift or other power lifting equipment
rated for at least 2250 lbs.
— Four lifting straps rated for at least
2250 lbs. each
— Four heavy-duty lifting hooks or shackles
rated for at least 2250 lbs.
• For Power Connection:
— A power source that meets minimum
circuit requirements for machine (review
Power Supply on Page 11 for details)
— An electrician or qualified service person-
nel to ensure a safe and code-compliant
connection to power source
• For Assembly:
— Safety glasses for each person
— Leather gloves for each person
— Disposable Shop Rags
— Cleaner/degreaser (see Page 16)
— Quality metal protectant/lubricant
— Hammer & Pry Bar
— Open-End or Socket Wrench 14mm
— Hex Wrench 5mm
— Piece of metal stock
This is an extremely heavy machine! Serious
personal injury or death may occur if safe
lifting and moving methods are not fol-
lowed. To be safe, you will need assistance
and power lifting equipment when moving
shipping crate and removing machine from
crate. Seek assistance from a professional
rigger if you are unsure about your abili-
ties or maximum load ratings of your lifting
equipment.
To Next Page
Loading...
Need help?
General
