Model G0886 (Mfd. Since 01/19)
-75-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0886
grizzly.com
Specifications
MODEL G0886
12" x 14" AUTO METAL-CUTTING BANDSAW
WARNING!
Main Motor: 3 HP, 220V, 3-Phase
Feed Motor: 0.3 HP, 220V, 3-Phase
Hydraulic Motor: 1 HP, 220V, 3-Phase
Coolant Motor: 1/8 HP, 220V, 3-Phase
Full-Load Current: 13.32A
Blade Speeds: 92, 161, 236 338 FPM
Blade Length: 155-1/2"
Max. Round at 90°: 11-13/16"
Max. Rect. at 90°: 11-13/16"H x 14"W
Weight: 1630 lbs.
Mfd. for Grizzly in Taiwan
Date
S/N
To reduce risk of serious personal injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and a respirator.
4. Properly ground machine—connect to permanently grounded metal wiring
system or an equipment-grounding conductor.
5. Ensure machine is correctly set up before starting.
6. Only remove jammed cutoff pieces when blade is stopped.
7. Disconnect all power to machine before changing blades, servicing, or doing
maintenance.
8. Always maintain proper adjustment of blade tension, tracking, and guides.
9. Always ensure workpiece is securely clamped in vise while cutting.
10. Only run saw with wheel covers closed and all guards in place.
11. Do not wear loose clothing, gloves, jewelry, or other items that can get
entangled in moving parts. Tie back long hair and roll up long sleeves.
12. Do not operate when tired or under influence of drugs or alcohol.
13. Do not expose to rain or use in wet locations.
14. Prevent unauthorized use by children or untrained users; restrict access or
disable machine when unattended.
DISCONNECT
POWER BEFORE
ADJUSTMENTS,
MAINTENANCE, OR
SERVICE.
EYE INJURY
HAZARD!
Always wear safety
glasses when using
this machine.
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call (800) 523-4777.
WARNING!
Fluid Capacity
Coolant Tank
6.5 gal.
Specific to Operation and Material
Component TypeCapacity
Hydraulic Tank
4 gal.
ISO 46 Hydraulic Oil or SAE 20 Equivalent
601
On feed
motor.
On hydraulic
motor.
On coolant
pump.
602
602
602
603
604
605
606
On main
motor.
602
607
608
609
610
612
613
611
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
601 P0886601 SAFETY GLASSES LABEL 608 P0886608 GRIZZLY NAMEPLATE-LARGE
602 P0886602 ELECTRICITY LABEL 609 P0886609 GRIZZLY.COM LABEL
603 P0886603 MODEL NUMBER LABEL 610 P0886610 ELECTRICITY LABEL-LARGE
604 P0886604 READ MANUAL LABEL 611 P0886611 BANDSAW BLADE LABEL
605 P0886605 MACHINE ID LABEL 612 P0886612 TOUCH-UP PAINT, GRIZZLY GREEN
606 P0886606 DISCONNECT 220V LABEL 613 P0886613 TOUCH-UP PAINT, GRIZZLY PUTTY
607 P0886607 FLUID CAPACITY LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
To Next Page
Loading...
Need help?
General
