Model G1066R/Z/G1079R (Mfd. Since 02/11)
-35-
Aluminum Oxide Sanding Rolls, 6" x 50'
H4776—36 Grit: Use for rough sawn boards,
thickness sanding, and glue removal.
G2787—60 Grit: Use for thickness sanding and
glue removal.
H4777—80 Grit: Use for removing planer marks
and initial finish sanding.
G2788—100 Grit: Use for removing planer marks
and initial finish sanding.
H4778—120 Grit: Use for finish sanding.
G2789—150 Grit: Use for finish sanding.
SECTION 5: ACCESSORIES
order online at www.grizzly.com or call 1-800-523-4777
Model D3003—PRO-STIK
®
Cleaning Pad
Extend the life of your sandpaper! Just feed this
crepe-rubber cleaning pad through your drum
sander to remove dust build-up from the sandpa-
per without damage. Measures 15" x 20" x 1
1
⁄8".
Figure 75. D3003 PRO-STIK® Cleaning Pad.
Aluminum Oxide Sanding Rolls 3" x 22'
T23880—60-Grit: Use for thickness sanding and
glue removal.
T23881—80-Grit: Use for removing planer marks
and initial finish sanding.
T23882—100-Grit: Use for removing planer
marks and initial finish sanding.
T23883—120-Grit: Use for finish sanding.
T23884—150-Grit: Use for finish sanding.
T23885—180-Grit: Use for finish sanding.
T23886—220-Grit: Use for finish sanding.
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
T28172—14" x 39" Heavy-Duty Roller Table
T28369 —14" x 78" Heavy-Duty Roller Table
T28370—14" x 118" Heavy-Duty Roller Table
Increase material handling and processing effi-
ciency with one or more of these Heavy-Duty
Roller Tables. Ideal for easily positioning of mate-
rial into sander. Simply place a roller table on one
or both sides of your sander and production time
is automatically improved!
Figure 76. Heavy-duty roller tables.
To Next Page
Loading...
Need help?
General
