-8-
Model G7945/G7946 (Mfd. Since 09/17)
The information contained herein is deemed accurate as of 6/14/2018 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G7946
Main Specifications:
Operation Information
Type......................................................................................................................................................... Radial
Swing......................................................................................................................................................... 34 in.
Spindle Taper........................................................................................................................................... JT#33
Spindle Travel........................................................................................................................................ 3-1/4 in.
Max. Distance From Spindle to Column........................................................................................ 5-1/2 – 17 in.
Max. Distance From Spindle to Table................................................................................................. 29-1/2 in.
Number of Spindle Speeds............................................................................................................................... 5
Range of Spindle Speeds........................................................................................................ 550 – 3000 RPM
Max. Head Tilt (Left/Right)................................................................................................ Left 90/Right 45 deg.
Max. Head Swivel................................................................................................................................. 360 deg.
Drilling Capacity (Mild Steel)........................................................................................................ 1/2 in. in Steel
Drill Chuck Type....................................................................................................................... JT33 Key Chuck
Drill Chuck Size............................................................................................................................. 1/16 – 5/8 in.
Spindle Information
Distance From Spindle to Base........................................................................................................... 49-3/4 in.
Quill Diameter....................................................................................................................................... 1.575 in.
Table Information
Max. Table Tilt (Left/Right)..................................................................................................................... 90 deg.
Table Swing.......................................................................................................................................... 360 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Max. Movement of Work Table............................................................................................................ 24-1/2 in.
Table Diameter.................................................................................................................................. 12-3/16 in.
Table Thickness........................................................................................................................................... 1 in.
Vertical Table Travel.................................................................................................... Crank Handle Operation
Number of T-Slots............................................................................................................................................ 6
T-Slot Size................................................................................................................................................ 5/8 in.
T-Slot Centers....................................................................................................................................... 3-1/4 in.
Floor-To-Table Height................................................................................................................. 22-1/2 – 47 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Column....................................................................................................................................................... Steel
Spindle Housing................................................................................................................................... Cast Iron
Head.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Paint Type/Finish.................................................................................................................................... Enamel
Other Related Information
Base Length........................................................................................................................................ 17-1/2 in.
Base Width.......................................................................................................................................... 10-1/2 in.
Mobile Base........................................................................................................................................... D2260A
Column Diameter.................................................................................................................................. 2.790 in.
Depth Stop Type.......................................................................................................................................... Hub
Has Work Light.............................................................................................................................................. No
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................ 30 Minutes
Serial Number Location ................................................................................................................... ID Label on Head
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................... Yes
Awards .............................................................................. Popular Woodworking Editor's Choice Tool Buying Guide
To Next Page
Loading...
Need help?
General
