Grizzly G7945 User Manual

-2-
Model G7945/G7946 (Mfd. Since 09/17)
INTRODUCTION
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that
sometimes the machine
you receive is
slightly different than shown in the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something
,
check our
website for an updated version. W
e post
current
manuals and
manual updates for free
on our web-
site at
www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write down
the
Manufacture Date and Serial Number
from
the machine ID label (see below). This information
is required for us to provide proper tech support,
and it helps us determine if updated documenta-
tion is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy
The G7945 and G7946 function and operate the
same but have the following differences:
G7945
• Table Size ..................................9"L x 8
5
⁄8"W
• Max. Movement of Work Table ...............9
1
⁄2"
• Number of T-Slots ...................................... 2
• Swing ....................................................... 34"
• Floor-to-Table Height .......................6
1
⁄2"–16"
• Max. Distance From Chuck to Table .... 12
3
⁄4"
• Spindle Taper ..................................... JT#33
G7946
• Table Size .................................... 12
3
⁄16" Dia.
• Max. Movement of Work Table ............. 24
1
⁄2"
• Number of T-Slots ...................................... 6
• Swing ....................................................... 34"
• Floor-to-Table Height .................... 22
1
⁄2"–47"
• Max. Distance From Chuck to Table ....29
1
⁄2"
• Spindle Taper ..................................... JT#33
Machine Description
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number
and manufacture date from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info

Grizzly G7945 Specifications

General

Brand	Grizzly
Model	G7945
Category	Drill
Language	English