-32-
Model G7945/G7946 (Mfd. Since 09/17)
Figure 37. Model G8581
1
⁄2" Keyless Drill Chuck.
G8581—
1
⁄2" Keyless Drill Chuck JT33
Industrial-grade keyless chucks are excellent for
quick bit changes. Knurled grips and exceptional
accuracy make these chucks an indispensable
part of any shop. Use on drill presses, lathe tail-
stocks and milling machines. 0 –
1
⁄2" capacity with
a Jacobs Taper #33 in back.
G2500—20-Pc. Regular Sanding Drum Set
Use on your drill press, lathe, or hand drill. This kit
consists of 5 drums in popular
1
⁄2" x
1
⁄2",
3
⁄4" x 1",
1" x 1", 1
1
⁄2" x 1
1
⁄2", and 2" x 1
1
⁄2" sizes. Comes with
50-, 80-, and 120-grit sizes for each drum.
Figure 38. Model G2500 20-Pc. Regular
Sanding Drum Set.
G5753—Drill Press Vise 6"
If you use a drill press and value your fingers, you
need one of these. Made from high-grade cast
iron, these hefty horizontal vises offer support and
stability.
Figure 36. Model G5753 Drill Press Vise 6".
SECTION 5: ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at www.grizzly.com or call 1-800-523-4777
Figure 39. Assortment of basic eye protection.
Basic Eye Protection
T20501—Face Shield Crown Protector 4"
T20502—Face Shield Crown Protector 7"
T20503—Face Shield Window
T20451—“Kirova” Clear Safety Glasses
T20452—“Kirova” Anti-Reflective S. Glasses
T20456—DAKURA Safety Glasses, Black/Clear
T20451
T20452
T20502
T20503
T20456
To Next Page
Loading...
