Model G7947/G7948 (Mfd. Since 01/21)
-37-
H8196—3-Pc. Step Drill Set
These step drills are designed to incremen-
tally drill through sheet metal and thin stock until
reaching the desired hole size. Three step drills
cover hole sizes from
1
⁄8" to
1
⁄2" in
1
⁄32" increments,
3
⁄16" to
1
⁄2" in
1
⁄16" increments, and
1
⁄4" to
3
⁄4" in
1
⁄16” increments. No-slip shanks fit
3
⁄8" chucks.
Titanium nitride coated for long life.
Figure 49. H8196 3-Pc. Step Drill Set
H8203—Professional Drill Bit Sharpening
Machine (For Bits
1
⁄8"–
1
⁄2" in Diameter)
This precision made Drill Bit Sharpening Machine
is so simple to use, anyone can sharpen dull,
smaller bits in three easy steps. Just set the drill
bit in the collet, grind the taper relief angle, then
grind the web thinning angle to reduce the center
point width. It features a depth adjustment gauge,
tapered diamond wheel, 90°–140° angle setting
adjustment, and built-in collet tray. Collet sizes
include
1
⁄8",
5
⁄32",
3
⁄16",
1
⁄4",
9
⁄32",
5
⁄16",
3
⁄8",
25
⁄64",
7
⁄16",
15
⁄32", and
1
⁄2". Patented in the US!
Figure 50. H8203 Professional Drill Bit
Sharpening Machine.
T10456—Heavy-Duty Anti-Fatigue Mat 3' x 5'
This Heavy-Duty Anti-Fatigue Mat features bev-
eled edges and no-slip tread for safety and
comfort. Open-hole design allows liquid to drain
through, so it's perfect for wet or oily conditions.
Measures 3' wide x 5' long x
3
⁄8" thick.
H7789—Mortising Attachment
A mortising attachment and chisel lets you drill
square holes in wood. The attachment holds the
sharp cornered chisel in place while the inner drill
cuts out the center. Drills have
1
⁄2" shank. (For the
G7947 & G7948 requires G9716 Quill Collar to
work.)
order online at www.grizzly.com or call 1-800-523-4777
Figure 48. H7789 Mortising Attachment.
Figure 51. T10456 Heavy-Duty Anti-Fatigue Mat.
To Next Page
Loading...
