Groeneveld BEKA-ONE - Filling The Device When Using A Cartridge; Cartridge Installlation

© Groeneveld-BEKA GmbH 2023 -15- Alle Rechte vorbehalten!
9.2 Filling the device when using a cartridge
9.2.1 Insert the cartridge
• Youreceivethecartridgelledwithlubricant.
• Detachtheprotectivehousingbyturningitcounter-clockwise.
• Unscrewthecoverfromthecartridge.
• Carefullypresssomelubricantoutofthecartridge(seeg.6left).
• Placethecartridgeontheintakeholeofthedeviceandtightenit.
Becarefulnottoovertightenthethread.
• Collectanyoutcominglubricantinasuitablereceptacleanddisposeofitprofssionally!
• Observe the safety data sheet of the manufacturer.
• Pleasemindthatthelubricantviscositychangeswiththeoperatingtemperature!
• Payattentiontoutmostcleanlinesswhenlling!
Fig.6:
• Placetheprotectivehousingonthedeviceagainandtightenit.
Becarefulnottoovertightenthecover!
• Actuateseveralintermdiatelubricationprocessesaftereachexchangeofthecartridgeuntil
lubricant escapes at the device outlet free of air inclusions.
• Proceed as described under 11.5 Actuate an intermediate lubrication.
Attention!
Intake hole
Press
a little lubricant
out of the cartridge
Attention!