© Groeneveld-BEKA GmbH 2023 -5- Alle Rechte vorbehalten!
3. General safety instructions
Allpersonsentrustedwithassembly,commissioning,maintenanceandoperationmustcarefullyread
thisoperatingmanualbeforeassemblyandcommissioningofthedeviceonthemachine!Furthermo-
re this manual must always be available at the site of operation.
Thefollowingcontainsbasicinformationthatmustbeobservedforoperationandmaintenance.
3.1 Safety instructions
Observethegeneralsafetyinstructionsinthismainchapterbutalsothespecialsafetyinstructionsin
otherchaptersofthisoperatingandassemblymanual.
Warningofelectricalvoltage.
Safetyinstructionswhichmightcausehazardstopersonsincaseofnon-observanceare
markedwiththegeneraldangersymbol.
This symbol warns of hot surfaces.
Warningofsuspendedloads.
Warningofmaterialdamageduetoelectrostaticdischarge!Markspotentialriskswhich
mayresultinmaterialdamageifnotavoided.
Thisheadingisusedwhenifimproperorgeneralnon-observanceoftheoperating
manual,workinstructions,speciedworkowsandthelikemightresultindamageof
the device.
We use this term to point out particular details.
Strictly observe any instructions that are directly attached to the device and keep them in
readable condition !
3.2 Personnnel qualication and training
The personnel for operation, maintenance, inspection and assembly must have the
appropriatequalicationforthiswork.Theoperatormustclearlydenecompetence,
responsibilites and supervision of the personnel. In case the personnel does not have the
necessaryknowledge,theyhavetobetrainedandinstructedaccordingly.Theoperatoris
obligedtoensurethatthepersonnelfullyunderstandsthecontentsofthisuserinforma-
tion.
Attention!
Note!