EasyManua.ls Logo

Grouw! 18739 - Before Installation

Grouw! 18739
268 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158
BEFORE INSTALLATION
It is recommended that you make
a sketch of your lawn showing the
obstacles that you want to protect. This
provides a good overview of the cabling
work, as well as the best location for the
charging station.
Draw the boundary cable from the
charging station around the garden
and around any obstacles you want to
protect, such as flower beds, small trees,
etc.
The following section explains how to
install the robotic lawnmower. Please
read this section carefully before plan-
ning and installing the boundary cable.
Also check how much boundary
cable (length) you expect to need.
Enough cable is included to go all the
way around lawns up to the capacity
limit, but if you have a lot of flower
beds (islands) within the lawn which
the cable has to go around, this may
require many metres of extra cable.
It may be necessary to purchase
additional boundary cable and extend
it.
Charging station
Charging
station
0.8 m

Related product manuals