EasyManuals Logo

Growatt SPH3000 User Manual

Growatt SPH3000
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
15 16
5.3.2 Installation of SPH
1.Project the machine's probably size on the wall; the thickness of wall for SPH must
be not less than 60mm.
Make sure the drill position, use paper board(installation guide), put the paper
board cling to the wall, make sure the top edge of paper board is levelAs the chart
5.8a below).
Mark four points at the wall via the hole of the paper board, then remove the paper
board
Drill four Ф8 holes at the mark point, the depth is not less than 55mm
Knock four explosion bolt intoФ8 holesAs the chart 5.8b below
2.
3.
.
4. .
5. .
6.Hang the energy storage machine on the four setscrewsAs the chart 5.8c
below
7.Lock the nut of setscrewAs the chart 5.8d below
8.The whole installation has finished
a)
Chart 5.7
5.3 Installation Instructions
5.3.1 Attention Layoutlength of sensors consider
There're three types of sensors for use with Growatt SPH. one is wired current sensor,
one is meter sensor, or SP-CT, if you choose wired sensor or meter . Before installing
you should know something that as below:
The cable of wired sensor and meter is suggested not longer than 15m. so you need
to consider the length between SPH with combiner box for the sensor should be
installed in the live line. And if you installed SP-CT for sensor, Distance recommended
not more than 30 meters.
The installation layout of energy storage machine at home as following

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Growatt SPH3000 and is the answer not in the manual?

Growatt SPH3000 Specifications

General IconGeneral
ModelSPH3000
CategoryInverter
Rated Power3000 W
Max. DC Voltage550 V
MPPT Voltage Range120 V - 500 V
AC Output Voltage230 V
Frequency50/60Hz
Dimensions505 x 453 x 198 mm
Weight26 kg
Start Voltage150 V
Nominal DC Voltage360 V
Number of MPP Trackers2
AC Nominal Power3000 W
Max. AC Apparent Power3000VA
AC Voltage Range180-280V
Power Factor0.8 leading to 0.8 lagging
THDi<3%
AC Connection TypeSingle Phase
Max. Charging Current50A
Max. Discharging Current50A
Max. DC Power for Charging/Discharging3000W
Protection DegreeIP65
Cooling MethodNatural Convection
Max. Output Power3000 W
Max. Efficiency97.5%
THD<3%
Battery Voltage Range40-60V
CommunicationWiFi
Operating Temperature Range-25 ~ +60 °C

Related product manuals