Grundfos CIM 500

Appendix
30
1.5 Network settings
This web page is used to configure the network settings of the webserver and of the GENIpro TCP protocol. The network settings here are
also used for BACnet IP. Additional configuration of BACnet IP is done in the Real Time Ethernet Protocol menu. See EtherNet/IP
configuration.
Fig. 4 Network settings
TM07 4524 1919
Object Description
IP Address
Configuration of the static IP address if a DHCP server is not used.
Default: 192.168.1.100.
Subnet Mask
Configuration of the subnet mask if a DHCP server is not used.
Default: 255.255.255.0.
Gateway
Configuration of the gateway address if a DHCP server is not used.
Default: 192.168.1.1.
DNS Server
The module can be configured to use a specific domain name server, if available on the network.
Default: 0.0.0.0.
Use DHCP
The module can be configured to automatically obtain the IP address from a DHCP server, if available on the
network.
Default: Do not use DHCP.