Grundfos CRE - Page 29

7.3.2 Menu overview for Grundfos GO Remote
Dashboard
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
CME Multipump system
● ● ●
"Status"
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
CME Multipump system
"System mode"
●
1)
"Resulting setpoint" ● ●
"Resulting system setpoint"
●
1)
"Actual controlled value" ● ●
●
1)
"Motor speed" ● ●
"Power consumption" ● ●
"Power cons., sys."
●
1)
"Energy consumption" ● ●
"Energy cons., sys."
●
1)
"Acc. flow, specific energy" ● ●
●
1)
"Operating hours" ● ●
"Operating hours, system"
●
1)
"Pt100/1000 input 1" ● ●
"Pt100/1000 input 2" ● ●
"Analog output" ● ●
"Analog input 1" ● ●
"Analog input 2" ● ●
"Analog input 3" ● ●
"Digital input 1" ● ●
"Digital input 2" ● ●
"Digital in/output 3" ● ●
"Digital in/output 4" ● ●
"Fitted modules" ● ●
"Pump 1"
●
1)
"Pump 2"
●
1)
"Pump 3"
●
1)
"Pump 4"
●
1)
1)
Only available if Grundfos GO Remote is connected to a multipump system.
29
English (US)