11 | Page
CONTROL PCB TERMINAL CONNECTIONS:
The control terminal connection
varies based on the app
INSTALLATION - DRAINAGE:
Using one float switch
Start condition:
If the liquid level in the pit/tank rises, ie. Float A is in up position. Panel will
start pump A. Panel will alternate between pump A and pump B after previous
cycle is completed. LCD screen will display RUN whichever pump in running.
Stop condition:
If the liquid level in the pit/tank falls, ie. Float A is in down position. Panel will
stop whichever pump is running. This means that there is not enough water to
pump. LCD screen will display No water.
To Next Page
Loading...
Need help?
General
