28| Page
The controller has communication interface, between the pump controller
and computer/SCADA/BMS, users can realize a long-distance monitoring
function. This function applies to where the controller is installed in the
basement or pumping room, but users require to monitor and control the
pump on the ground or in a control room.
BASIC FUNCTION:
Computer/SCADA/BMS (Optional) with communication interface can
realize long distance monitoring. In the control room, users can realize all
the functions of the master controller through the slave controller, except
parameter calibration and adjusting.
SPECIAL APPLICATION:
As adopting communication interface, the communication distance
through wire is less than 1200 meters. whereas for a longer communication
distance like mine, water tower, across railway road and bridge etc., users
can adopt RS485 extender.
To Next Page
Loading...
